Opticon H-16 - Manual (Page 42)

8
Chapter . Bluetooth Connections
8
. Select the device with which you want to a Bluetooth partnership, and tap Next.
. In Passcode, if you want to use a passcode
(recommended for enhanced security), enter
alphanumeric passcode between 1 and 1
characters, and tap Next. Otherwise, leave the
passcode blank.
Tap the Refresh button if the device
you want to connect is not listed.
. Enter the same passcode on the other device.
. Select the service to use from the device, and tap Finish.
Once you create a partnership, the Bluetooth-enabled devices don't need to be visible to beam
information between them; Bluetooth needs only to be turned on.