Onkyo DV CP704 - Manual (Page 24)

24
Basic Playback—Continued
This section explains how to load and remove discs with-
out stopping playback.
The section explains how to select loaded discs.
Notes:
• The type of disc currently selected is shown on the dis-
play: DVD, or CD (see page 12).
• You can select discs while the DV-CP704 is stopped
or during playback.
• You can use the [DISC SKIP] button to skip the cur-
rent disc and start the next disc. If disc #6 is the current
disc, disc #1 will be selected next.
Loading Discs During Playback
1 Press the OPEN/CLOSE [ ]
button.
The disc tray opens.
The disc that’s currently playing
remains inside the DV-CP704 and its
disc bay is empty and won’t come to the
front. To remove this disc you must
stop playback before pressing the
OPEN/CLOSE [
] button.
2 Load or remove discs as
required, and press the [DISC
SKIP] button to access the other
disc bays.
3 When you’ve finished, press the
OPEN/CLOSE [
] button again.
The disc tray closes.
Playback of the current disc continues
uninterrupted until you either stop
playback or select another disc.
Tip: If you press one of the DISC
SELECT 1–6 buttons, the disc tray will
close, playback of the current disc will
stop, and playback of the newly
selected disc will start automatically.
DISC SKIP
DISC
SELECT OPEN/CLOSE
DISC SKIP
DVD CD MP3 WMA JPEG
Remote controller
Remote controller
Remote controller
Selecting Discs
Use the DISC SELECT buttons to
select loaded discs.
On the display, the number of the cur-
rent disc has a circle around it.
What happens next depends on the type
of disc you selected, as follows:
DVD-Video:
Typically a menu appears onscreen.
See page 26.
Audio CD:
Playback starts automatically.
MP3/WMA/JPEG:
Playback starts automatically,
although this may vary depending
on the disc.
JPEG-only CD:
The slideshow starts automatically.
See page 32.
DVD CD MP3 WMA JPEG