Basic playback – Onkyo DV CP704 User Manual

Page 23

Basic Playback

This section explains how to load and remove discs.

Notes:
• You can load up to six discs. You don’t have to load all

six discs every time.

• When the disc tray is closed, all of the disc indicators

appear until the DV-CP704 has checked each bay for
the presence of a disc. If a bay is found to have no disc,
the corresponding indicator disappears.

• The disc tray can be opened and closed even while the

DV-CP704 is in Standby mode, so you don’t have to
turn it on to load or remove your discs. (The disc tray
may take several seconds to open.)

• The DV-CP704 supports 8 cm and 12 cm discs. To

avoid damaging your discs or DV-CP704, always
place discs in the center of the disc bays.

• Only load discs that are supported by the DV-CP704

(see page 7). Don’t load cartridge-type discs.

• To avoid personal injury, keep your hands away from

the disc tray as it closes.

• Always use the OPEN/CLOSE [

] button to open

and close the disc tray. Never push the disc tray, and
don’t touch it, or obstruct it while it’s opening or clos-
ing. Don’t press down on the disc tray while it’s open,
and don’t load anything other than supported discs.
Doing so may damage your discs or DV-CP704.

Loading & Removing Discs

Press the OPEN/CLOSE [

]

button.
The disc tray opens and the six disc
number indicators appear on the dis-
play. A circle appears around the num-
ber of the disc bay on the right.

Place a disc, label side up, into
each bay.

Press the [DISC SKIP] button to
access the other disc bays.
The disc tray turns counterclockwise
two bays at a time.
Press the remote controller’s DISC
SKIP [+] button to turn the disc tray
counterclockwise. Press the DISC
SKIP [–] button to turn it clockwise.

When you’ve finished, press the
OPEN/CLOSE [

] button again.

The disc tray closes.
See page 24 for information on select-
ing and playing discs.

PLAY

OPEN/CLOSE

DISC SKIP

DISC

SELECT

DVD

MP3

WMA

JPEG

Remote controller

Tip: If you press the Play [

] button,

the disc tray will close and playback of
the disc in the right bay will start auto-
matically. If there is no disc in that bay,
the DV-CP704 will check the other
bays and play the first disc it finds.
Tip: If you press one of the DISC
SELECT 1–6 buttons, the disc tray will
close and playback of the selected disc
will start automatically.