Onkyo DV CP704 - Manual (Page 18)

18
Connecting the DV-CP704—Continued
This section explains how to connect the DV-CP704 to
your TV or projector.
In this hookup example, the TV handles the audio and video.
To enjoy Dolby Digital or DTS (5.1-channel surround),
you’ll need a compatible decoder (see page 19).
The DV-CP704 has three types of video output: compo-
nent video, S-Video, and composite video. Component
video offers the best picture quality, so if your TV supports
it, use a commercially available component video cable to
connect the DV-CP704’s COMPONENT VIDEO OUT-
PUT to the component video inputs on your TV. If your
TV supports progressive scanning, you must use compo-
nent video in order to take advantage of that feature.
S-Video offers better picture quality than composite
video, so if your TV supports it, use the S-Video cable to
connect the DV-CP704’s S VIDEO OUTPUT to an
S-Video input on your TV. Failing that, use the supplied composite video cable to connect the DV-CP704’s
VIDEO OUTPUT to a composite video input on your TV.
Compatibility of this unit with progressive-scan TVs.
This player is compatible with progressive video Macro
Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOM-
MENDED THAT THE USER SWITCH THE CON-
NECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARD-
ING OUR TV SET COMPATIBILITY WITH THIS
MODEL 525p AND 625p DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Notes:
• Before making any connections, turn off the
DV-CP704 and your TV and disconnect their power
cords from the wall outlets.
• Also refer to the connection information supplied with
your TV.
• If you connect a TV that does not support progressive
scanning to the component video output, change the
HDMI Output Setting to Off (see page 44).
• Connect the DV-CP704’s video outputs directly to
your TV. Don’t connect a VCR or other video equip-
ment in between your DV-CP704 and TV. Doing so
may result in picture distortion, because of the copy
protection system used on DVD-Video discs.
• When you use the analog audio outputs, don’t play
DTS CDs or don’t select DTS soundtracks on
DVD-Video discs. Doing so will produce unpleasant
digital noise, which may damage your equipment.
Connecting Your TV or Projector
Y
IN
P B
P R
L
R
ANALOG
INPUT
S VIDEO IN
VIDEO IN
S-Video cable
AV RCA/phono
cable (supplied)
(yellow)
(yellow) (white)
(white)
(red)
Component
video cable
TV or projector
(red)
Only one connection
required! Choose
component video,
S-Video, or
composite video.