Onkyo FR-N3X - Manual (Page 60)

60
◆
Five basic functions
Sleep timer
This timer places the FR-N3X into standby mode
automatically when the sleep timer counts down to
zero. This function is convenient, for example, when
you wish to fall asleep to music or a radio program.
Once, Weekday, and Weekend timer (For playback)
• When the programmed start time is reached, the
power is automatically turned on and the specified
input source starts playback.
• The unit enters standby mode when the specified
end time is reached.
• The Once timer operates only one time.
• The Weekday timer operates every Monday to Fri-
day (initial setting).
You can customize the Weekday timer to match
your schedule.
• The Weekend timer operates every Saturday and
Sunday (initial setting).
You can customize the Weekend timer to accom-
modate your weekend schedule.
Rec timer (For recording)
When the specified start time is reached on the speci-
fied day, the unit automatically powers on. The speci-
fied recorder starts recording data from the selected
input.
The following two settings are available for the REC
timer:
Once: Timer recording is made only once at the
specified time.
Every: Timer recording is made once every day at
the specified time. (You can also change the setting
for the day(s) of the week.)
• The unit enters standby mode when the set end
time is reached.
• The MD recorder enters record standby mode. If an
Onkyo cassette tape deck is connected to the FR-
N3X, change the input source indication from CD-R
to TAPE. In this case, you can select “TAPE” or
“MD&TAPE” as the recording device.
Tips
While Rec timer is operating, the sound is muted. To
check the sound during timer recording, press MUT-
ING or VOLUME
on the remote controller to turn
off the muting function.
◆
Using the Sleep timer
The Sleep timer can be set for 10 to 90 minutes, in
intervals of 10 minutes.
Checking the remaining time
Press SLEEP while the Sleep timer is on. If you press
SLEEP while the remaining time is displayed, the
remaining time is reduced by 10 minutes.
Canceling Sleep timer
Press SLEEP repeatedly until “Sleep off” appears in
the display.
Turning off the unit automatically after
completing CD Dubbing
If you set the Sleep timer while you are carrying out
CD Dubbing to CD, MD, Onkyo stereo cassette tape
deck, or CD-R, the unit will turn off after completing
CD dubbing regardless of the remaining time you set.
This is convenient for starting CD Dubbing before
going to bed or going out.
Using the timer functions
The FR-N3X provides five timer functions: Sleep, Once, Weekday, Weekend, and Rec timer.
/
Press SLEEP while you are lis-
tening to music or a radio pro-
gram.
“Sleep 90” appears in the display, indi-
cating the unit will turn off in 90 min-
utes.
Each press of the same button reduces
the remaining time by 10 minutes.
SLEEP
Operating with the
remote controller