Onkyo FR-N3X - Manual (Page 55)

55
◆
Five basic functions
• All Erase
This function erases all the tracks and names to ini-
tialize the MD. (“Blank Disc” is displayed.)
• Erase
This function erases the selected track.
• Move
This function moves the selected track to the
desired position.
• Divide
This function divides the selected track.
• Combine
This function combines the selected track and the
immediately preceding track.
◆
Combining basic functions
Erasing part of a track – Divide and Erase
Divide the track at the end or beginning of the portion
you wish to erase. If necessary, repeat this operation
to separate an unwanted portion.
Then, erase the separated track.
Combining separately positioned tracks –
Move and Combine
If the tracks you want to combine are in different loca-
tions, move the track to be merged to a position fol-
lowing the other track, then combine them.
Notes on combining tracks
• You cannot combine a digital recording track and an
analog recording track. (If you try, “Impossible” will
appear on the display.)
• You cannot combine tracks recorded in different
recording modes. You can combine only tracks
recorded in the same recording mode. (For exam-
ple, a track recorded in MONO mode cannot be
combined with a track recorded in LP2 mode.)
Notes
• Information about the edited or erased contents is
recorded to the TOC of the MD when you eject the
MD, turn off the unit, or stop recording. Therefore,
do not disconnect the AC power cord (mains lead)
or vibrate the unit when the TOC indicator is lit or
flashing (see page 36).
• If the MEM, RDM, 1TR, or 1GR indicator is lit in the
display, you cannot edit or erase any tracks. In such
cases, cancel the MEMORY, RANDOM, 1TR, and
1GR playback mode (see page 42) before starting
the operation.
• If you edit an MD that has a group, the group infor-
mation may be modified.
◆
Erasing all tracks on an MD – All Erase
• You can execute this function only when the input
source is MD and an MD is stopped.
• To cancel the operation, press MD .
(Continued on the next page)
Moving, dividing, combining, and erasing MD tracks
1
Insert the MD, then select MD as
the source.
Use a recordable MD with the record-
protect tab closed.
2
Press EDIT/CLEAR/NO and turn
MULTI JOG until “All Erase?”
appears in the display.
3
Press MULTI JOG.
The confirmation message “All
Erase??” appears in the display.
4
Press MULTI JOG to erase all
tracks.
“Complete” appears in the display. All
tracks on the MD have been erased.
1
1
2
2-4