Onkyo FR-N3X - Manual (Page 19)

19
• You can preset up to 30 channels including both FM
and AM stations. For example, if you have already
stored FM stations to eight channels, you can use
22 channels to store preset AM stations.
• Programmed FM and AM stations are indicated
separately. Therefore, one of the preset FM stations
and one of the preset AM stations could use the
same channel number.
• The Preset Write function enables you to store
radio station frequencies to any channel number.
For example, you could program three AM stations
to channels 2, 5, and 9.
Programming AM/FM stations one by one — Preset Write
You can store the frequencies of AM stations one by one manually into the preset memory
channels. (You can store FM stations manually or by using the auto preset function.)
1
Press AM/FM to display “AM.”
Press again to select “FM” to store an
FM station.
2
Press TUNING / to tune in the
radio station you wish to preset.
If you hold down either of the buttons,
the frequency keeps changing.
3
Press EDIT/CLEAR/NO and turn
MULTI JOG until “Preset Write?”
appears in the display.
4-6
6
1
2
3, 6
4
Press MULTI JOG.
The channel number to be preset
flashes.
To cancel presetting, press EDIT/
CLEAR/NO instead.
5
If you wish to change the channel
number, turn MULTI JOG.
6
Press MUTLI JOG to confirm.
You may press MODE/YES instead of
MULTI JOG to get the same result.
If “Complete” appears
The radio station is registered to the
preset channel.
If “Overwrite?” appears
The channel you’ve selected is regis-
tered already.
• To register the new radio station
by deleting the existing radio sta-
tion
Press MODE/YES.
• To cancel presetting
Press EDIT/CLEAR/NO.
• If “Memory Full” appears
The FM/AM stations have already
been programmed into all 30 chan-
nels. Delete unnecessary stations
(page 50) and try again.
7 Repeat steps 2 to 6 to preset the next
channel.