Onkyo FR-N3X - Manual (Page 32)

32
Recording an FM/AM
broadcast program to an
MD
To record a very long program, switch
the recording mode. (Refer to page 36.)
1
5
4
6
3
EDIT/
CLEAR/NO
MODE/YES
1
Insert an MD.
Refer to Step 1 on page 22.
Use a recordable MD.
2
Check the available recording time on the MD.
Refer to Step 2 on page 27.
3
Select “FM” or “AM” for input.
4
Turn MULTI JOG to select a preset channel.
5
Press REC to set the FR-N3X into recording
standby mode.
If the FR-N3X does not enter record stand-by mode
See “Can’t dub?” on page 36.
Adjusting the recording
level
See page 38.
Turning Level Sync on or
off
See “Numbering the songs —
Level Sync” on page 39.
6
Press MD (play/pause) to start recording.
When the MD is recorded up to its end, recording automati-
cally stops.
To stop a recording while in progress, press MD .
To pause recording
Press MD . The indicator lights up on the display.
Press the button again to resume recording from the stopped
point. At this time, the track number increases by one.
Numbering the desired song(s)
Press REC during recording of the desired song. If you do not
hold down REC long enough (about four seconds or less), the
song may not be numbered.
Tip!
During recording, you can
check the elapsed time and
remaining time on the MD
using the DISPLAY button (See
page 35).
MD
/
Elapsed time
Recording input source
Recording track
number
/