Oki B6200 Series - Manual (Page 46)

46 > INSTALLATION AND RELOCATION PROCEDURE
PRINTING A CONFIGURATION SUMMARY
To check whether the printer is correctly installed, use the control panel
to print the [System Settings List].
1. Press the
2. Press the < > or < > button until [Report/List] is displayed,
then press the < > button.
3. Press the < > or < > button until [System Settings] is
displayed, then press the < > button.
4. Press the button.
The [System Settings List] will be printed.
5. Press the
NOTE
If you have made a mistake when operating the control panel, press the
“The Control Panel and Menu system” on page 43 .
NOTE
> The layout of the [System Settings List] may differ depending on the
configuration and settings of the printer.
> For B6300, [Rear Output Tray] is displayed in the column for Output
Device even when the rear tray is not installed.
> Reports/lists cannot be output to the face up (rear) tray. When the face
up (rear) tray is installed, lower the face up (rear) tray output lever.