Oki 10i - Manual (Page 9)

Read Me First 9
English
Setting Up Your Printer
Before connecting the printer to your PC and mains outlet,
you must first install the toner cartridge and insert paper in
the paper tray.
Remove the Protective Sheet
1. Remove any adhesive tape from the outer covers. Press
and open the cover.
The first time you open the top cover will be to install your first
toner cartridge. At this time the power will be off and the printer
cold. When you open the top cover after this, for example to
change the toner cartridge, the fuser area will be hot. This area is
clearly marked. Do not touch it.
3. Remove the protective sheet.
Do not touch the Image Drum’s green surface.
4. Replace the image drum. 2. Remove the image drum.
10irgb.p65 01/04/98, 10:56 9