Olympus Waterproof Case PT-15 - Manual (Page 18)

E-17
Notch
Load the digital camera.
Quietly load the digital camera into the Case, taking care that the projecting
part of the zoom lever of the digital camera properly fits into the recessed
part of the zoom lever of the Case.(Page 13)
: • Confirm that the projecting part of the zoom lever of the
digital camera is set securely to the zoom lever notch on the
inside of the protector. When the setting is not secure, the
loading of the digital camera is not complete and closing of
the rear lid of the protector may not be possible or zoom
does not function even when the zoom lever is operated, so
that caution is required.
CAUTION
Set the mode dial.
After the digital camera has been loaded, push down the mode dial of the
protector from the upper surface of the protector and set it so that the lower
part of the mode dial of the
protector on the inside of the
protector fits properly onto the
upper part of the mode dial of the
digital camera.
Also, load the camera so that the
power switch of the digital camera
fits into the power switch lever
notch on the inside of the protector.
Advice • After setting the mode dial of the protector, set the power of the digital
camera to 'OFF', and before sealing the protector, operate the mode
dial and confirm that the mode of the digital camera is switched.