Oricom DECT ECO7100-1 - Manual (Page 38)

36
Press Play/Stop button in standby mode
Press and hold Mute/C/Delete button for about
5 seconds to delete all the recorded messages.
A confirmation tone will be emitted and the base will
return to standby mode.
Record your MEMO
Press and hold MEMO button in standby mode and
the LCD will display:

 
You can start to record your message (speak as you
normally do in the speaker mode) and press MEMO
button again to save to the recorded message
Play your MEMO
Press Play/Stop button in standby mode to listen the
recorded MEMO
Press CID up/down button to go back to the previous
message or skip to the next one
You can adjust the volume by pressing Volume up/
down button
Delete a MEMO
Press Play/Stop button in standby mode and select
a memo by pressing CID up/down button
Press Mute/C/Delete button to delete the selected memo
A confirmation tone will be emitted and the base will
return to standby mode.
Answering system on the base
Turn on/off the answering system
You can press ANS button to turn on/off the
answering machine.
Note:
When it is set On, An On will be displayed on
the LCD and answering machine icon will also
be displayed. When it is Off, An Off will be
displayed on the LCD.
Listen to the recorded message
Press Play/Stop button in standby mode to play the
corded messages, press CID up/down button to
skip to the next message or go back to listen to the
previous one
Delete a recorded message
Press Play/Stop button in standby mode and select
one recorded message by pressing CID up/down
button
Press Mute/C/Delete button to delete the selected
message.
A confirmation tone will be emitted and the base will
return to standby mode.
Delete all recorded messages
ANSWERING SYSTEM ON THE BASE