Oricom DECT ECO7100-1 - Manual (Page 30)

28
ANSWERING SYSTEM
Answering system
Turn On/ off the answering system
1. Press MENU button in standby mode
2. Press Up/Down button to select ANSW MACHINE
and press OK button to confirm
3. Press Up/Down button to select ANSW. ON/OFF
and press OK button to confirm
4. Press Up/Down button to select ON or OFF and
press OK button to confirm Or you can simply
press the ANSWER ON/OFF button on the base
unit to turn it on or off
Set the answering mode
1. Press MENU button in standby mode
2. Press Up/Down button to select ANSW MACHINE
and press OK button to confirm
3. Press Up/Down button to select ANSWER MODE
and press OK button to confirm
4. Press Up/Down button to select ANSW.&RECORD
or ANSWER ONLY and press OK button to confirm
Set Ring delay
1. Press MENU button in standby mode
2. Press Up/Down button to select ANSW MACHINE
and press OK button to confirm
3. Press Up/Down button to select SETTING and
press OK button to confirm
4. Press Up/Down button to select RING DELAY
and press OK button to confirm
5. Press Up/Down button to select 2-7 rings or
ECONOMY and then press OK to confirm
Note:
When ECONOMY mode is selected, the
answering machine will answer calls & start to
play the message after 5 rings if there is no new
recorded message(s), or after 3 rings if there is
at least one new recorded message.
Listen to the recorded messages
1. Press MENU button in standby mode
2. Press Up/Down button to select ANSW MACHINE
and press OK button to confirm
3. Press Up/Down button to select PLAY and press
OK button to confirm. The recorded messages
will be started to play, you can adjust the earpiece
volume by pressing the Up/down button
Or you can simply press the PLAY/STOP button on
the base unit to play the recorded messages
Delete ALL messages
1. Press MENU button in standby mode
2. Press Up/Down button to select ANSW MACHINE
and press OK button to confirm
3. Press Up/Down button to select DELETE ALL
and press OK button to confirm.