Handset tone – Oricom DECT ECO7100-1 User Manual

Page 35

Press OK/CLK button to confirm. A confirmation tone

will be emitted and the base will return to standby

mode.

Edit a Phonebook entry

Press Phonebook button in standby mode and

select an entry by pressing CID up/down button
Press and hold Phonebook button again till the

Phonebook icon is displayed on the LCD.
Press Mute/C/Delete button to erase the original

number
Key in the number and then press OK/CLK button to

confirm.
A confirmation tone will be emitted and the base will

return to standby mode.

Delete a Phonebook entry

Press Phonebook button in standby mode and

select an entry by pressing CID up/down button
Press Mute/C/Delete button and the LCD will be

displayed:
Press OK/CLK button to confirm. A confirmation tone

will be emitted and the base will return to standby

mode.

Delete all Phonebook entries

Press Phonebook button in standby mode
Long press and hold Mute/C/Delete button and the

LCD will be displayed:
Press OK/CLK button to confirm. A confirmation tone

will be emitted and the base will return to standby

mode.

Caller ID on the corded base

This is a call log that shows the phone numbers of the

incoming calls. There are 20 records can be stored on

the base with maximum 24 digits for each record.
Each CID record will be displayed with the

corresponding time, date and phone number (but CID

name won't be displayed.)

View CID record

Press CID up/down button to browse through the

call log in standby mode
The call log icon will be displayed on LCD, and the

corresponding record number will also be displayed

at the top right corner (such as #01).

Add a CID record into Phonebook

Press CID up/down button in standby mode to select

an entry
Press and hold Phonebook button till the Phonebook

icon is displayed on the LCD
Press Mute/C/Delete button to erase the digits if you

want to edit the number, then press OK/CLK button

to confirm.

HANdSET TONE

CORdEd BASE OpERATIONS