Oricom DECT ECO7100-1 - Manual (Page 32)

30
ANSWERING SYSTEM
If the answering system is turned off, you must
change your master PIN from its default 0000, before
you can use the remote access feature.
1. Press MENU button in standby mode
2. Press Up/Down button to select ANSW MACHINE
and press OK button to confirm
3. Press Up/Down button to select SETTINGS and
press OK button to confirm.
4. Press Up/Down button to select REMOTE ACC.
and press OK button to confirm.
5. Press Up/Down button to select ACTIVATE or
DEACTIVATE and press OK button to confirm.
Access the answering system remotely
Dial your home number from another phone, when
the answering system answers your call and starts to
play the OGM, press # key on the phone and enter the
remote access code (which is same as your PIN code)
The remote feature lets you perform the following
functions by pressing the corresponding
numeric key:
• Review message 1
• Play back messages 2
• Stop message playback 8
• Erase message 6 (during message playback)
• Skip message 3
• Turn on answerer machine 7
• Turn off answerer machine 9
Note:
If the answering system is off, and the master
PIN has been changed from its default 0000, it
will answer the call after 10 rings.