Onkyo HT-R490 - Manual (Page 25)

25
Selecting a preset radio station
1. Press either the AM or FM input selector button.
The display should show the currently selected frequency. If it
displays the listening mode, press the DISPLAY button to
display the frequency.
2. Using the PRESET
™/£ buttons, select the
number of the desired preset station.
When using the remote controller
1. Press the TUNER input selector button on the
remote controller.
2. Press the TUNER PRESET
5/∞ buttons and
select the number of the desired preset station.
Erasing a preset radio station
1. Select the preset radio station that you want erase.
Refer to “Selecting a preset radio station” above.
2. Press the FM MODE button while holding down
the MEMORY button.
• Once the preset station has been cancelled, the memory
location can be used to store another station.
Listening to Radio Broadcasts
Presetting a radio station
By storing (presetting) frequently received radio stations, they can
be received automatically by pressing the PRESET
™/£ button
on the front panel or TUNER PRESET
5/∞ buttons on the remote
controller.
Up to a total of 30 FM and AM stations can be preset.
1. Tune into the radio station you desire.
Lights
FM STEREO
FM STEREO MEMORY
FM STEREO
Lights off
Flashes (Preset number)
Lights
MEMORY FM MODE
CLEAR
2. Press the MEMORY button and, while the MEMORY
indicator lights, press the PRESET ™/£ button to
select the preset number (one of 1 to 30) to be used
with the station to be preset.
3. Press the MEMORY button to finalize the procedure.
This programs the radio station as a preset radio station.