Olympus CAMEDIA P-440 - Manual (Page 6)

6
Identifying the Parts
● Printer Body
AC power connector
This connector is used
to connect the power
cord.
USB connector
This connector is used
to connect a USB cable
from a PC.
Operation panel
This is used when printing by inserting a card
(xD-Picture Card/PC card) directly into the
printer. (Refer to the section on the
“Operation Panel” on page 7 for further
details.)
Printer cover
This is opened when
installing or replacing
the ink cassette.
Power (ON/OFF) switch
Paper output tray
This is pulled out when printing.
Paper cassette compartment lid
xD-Picture Card slot
xD-Picture Card containing
recorded pictures is inserted into
this slot when printing directly
from an xD-Picture Card.
PC card eject button
This button is pressed to
remove the PC card.
PC card slot
This slot is for inserting PC cards complying with PC standard
ATA specifications (PCMCIA). Type II PC cards can be used.
Use a PC card adapter or similar device when printing
SmartMedia, CompactFlash or Memory Stick data.
Cover eject lever
Dust cover
The dust cover is opened when
the paper cassette is inserted.
Paper discharge opening
Paper is discharged from this
opening after printing.
VIDEO OUT jack
This jack is used to
connect the printer to a
VIDEO IN port on a TV
monitor.