Olympus PPO-E03 - Manual (Page 16)

E-6
ቦ After inserting the camera, turn the PT-E series
case’s camera table lock lever all the way clock-
wise to lock the camera table. Then, push in the
zoom/MF dial on the PT-E series case and
engage it with the gear attached to the lens.
Turn the zoom/MF dial to confirm that it can con-
trol the lens’s MF operation.
MENU
ቧ Push in the PT-E series case’s power switch
dial and mode dial knob. Turn the power switch
dial and mode dial knob and confirm that they
can control the camera power ON-OFF and
mode switching. Connect the hot shoe mount
section of the hot shoe cable that has been
connected to the PT-E series case to the hot
shoe of the camera.
ቨ Attach the rear lid of the PT-E series case and
lock the four buckles (two diagonally located
buckles first, and then the other two diagonally
located buckles). Underwater shooting is now
possible.