Omega WI8XX-U - Manual (Page 34)

4.3.2 Get Readings from the End Device (continued)
ID: End Device ID/address
Sequence: Sequence number [0-255 ].
The Sequence number is incremented for each newly received data. Therefore,
it indicates if the sensor is transmitting data successfully.
Strength: It is the radio signal strength (0-100%), the higher the better.
Success: 0-100%, a low success rate indicates a longer data delay, shorter
battery lifetime and high network traffic.
Battery: The total voltage of the battery in the End Device. Once the voltage
gets to 3.0V, the batteries should be replaced.
Update: The time interval the Meter received data from the End Device.
Running/Lost: It displays "Running" if the Meter is receiving packages from the End
Device. It displays "Lost" if the Meter has not received data from the End Device.
Data Logging: Press to activate/de-activate data logging. When it is pressed to
activate data logging, a file browser pops up to ask for which file data will be
saved. Data is in Comma Separated Value (csv) format, which can also be
opened in Excel. Please name file with .csv extension.
Figure 4.8 Comma Separated Value Format
Columns from left to right: Date and time, Device ID, Device name, Reading 1,
Unit 1, Reading 2, Unit 2, Sequence number, Signal strength, Success rate,
Battery voltage, Status, Update, Next Device ID, Next Device name (up to 8 End
Devices).
ACTIVE data is currently being logged in the specified file.
INACTIVE data logging is not executed.
Refresh: How often the current applet asks for data from the embedded server.
See Section 4.3.4 before activating data logging.
28