Onkyo HT-R520 - Manual (Page 34)

34
Using the Tuner
With the built-in tuner you can enjoy AM and FM radio
stations. You can store your favorite stations as presets
for quick selection.
■ Auto Tuning Mode
When tuned into an FM station, the TUNED and FM
STEREO indicators appear on the display, as shown.
When tuned into an AM station, the TUNED indicator
appears.
■ Manual Tuning Mode
HT-R520 changes FM frequency in 0.1 MHz steps,
10 kHz steps for AM.
In Manual Tuning mode, FM stations will be in mono.
Switch back to Auto Tuning mode for stereo.
Tuning into weak FM stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Listening to the Radio
1 Use the [TUNER] input selector
button to select either AM or FM.
In this example, FM has been selected.
STANDBY/ON
PHONES
STANDBY
DISPLAY TONE TUNING MODE DIGITAL INPUT LISTENING MODE STEREO MEMORY
RETURN SETUP
VIDEO 2 TAPE TUNER C D VIDEO 3 DVD VIDEO 1
VCR
MULTI CH
MASTER VOLUME
TUNING
ENTER PRESET
S VIDEO VIDEO AUDIO L R VIDEO 3 INPUT CLEAR
SPEAKERS B A
TUNER
MEMORY TUNING MODE
MASTER VOLUME
TUNING
PRESET
DISPLAY
TUNER
Band Frequency
Tuning into Radio Stations
1 Press the [TUNING MODE] button
so that the AUTO indicator
appears on the display.
2 Press the TUNING Up or Down
[
]/[ ] button.
Searching stops when a station is
found.
1 Press the [TUNING MODE] button
so that the AUTO indicator disap-
pears from the display.
2 Press and hold the TUNING Up or
Down [
]/[ ] button.
The frequency stops changing when
you release the button.
Press the buttons repeatedly to change
the frequency one step at a time.
TUNING MODE MEMORY
CLEAR
TUNING
TUNED AUTO
FM STEREO
TUNING MODE MEMORY
CLEAR
TUNING