RCA THOMSON SpeedTouchTM (Wireless) Business DSL Router - Manual (Page 78)

Chapter 6
Meters, queues and IPQoS
E-NIT-CTC-20041213-0013 v0.5
76
6.5.1 Queue config parameters explained
In this section we will have a closer look at the different parameters and their values.
Dest
Queue
Propagate
Ecnmarking
dest value Description
phonebook entry The name of the interface you want to configure.
queue value Description
number (0..5) The number of the subqueue you want to configure,
where 0 is the best effort queue and 5 is the real time
(EF) queue
propagate value Description
enabled If the propagate function is enabled an overflow to a
lower priority queue will created in case the initial
queue is full.
disabled If the propagate function is disabled packets in excess
of the queue size will be dropped.
ecnmarking value Description
enabled If the encmarking function is enabled the congestion
Experienced (CE) codepoint in the ECN field is set. This
means that when a queue is congested the EC
codepoint will be set instead of dropping the packet.
disabled If the encmarking is disabled packets will be dropped if
the queue is congested.