3 ipqos per pvc, Introduction, Procedure – RCA THOMSON SpeedTouchTM (Wireless) Business DSL Router User Manual
Page 114: Ipqos per pvc, Chapter 8
Chapter 8
Scenario 2: Business user with TOS marking.
E-NIT-CTC-20041213-0013 v0.5
112
8.3 IPQoS per PVC
Introduction
Now we need to enable IPQoS on the PVC used to access the internet.
In our scenario we will use
atm_pvc_0_35
to access the internet.
Procedure
Proceed as followed:
Go to the IP QoS page and select the Configuration tab.
Expert mode -> IP Router -> IP QoS.
This will show you a list of all PVC’s configured on the SpeedTouch™
Now we need to change the maximum bandwidth that can be used for EF traffic
when congestion is experianced.
Proceed as followed:
1
Select atm_pvc_0_35
2
Check the State box to enable IPQoS for this PVC.
3
Change the Max highest queue rate (%) from
80%
to
50%
.
4
Click apply.
5
Click Save All to save the modifications to the modem/router.