Radio Shack 49-1000 - Manual (Page 27)

27
Beyond the Basics
Question Answer
Why won’t my lights
turn on or off using the
on or off buttons on my
Keychain Remote?
 Be sure you set the correct
SECURITY LIGHT CODE in your
Security Console, see Setting
Security Console Options on
page 15.
 Be sure the light your are trying
to control has its on/off switch
in the on position. And, check to
see that the bulb is good.
 Plug your Module into another
outlet near your Security
Console.
 Be sure the indicator on your
Keychain Remote lights when
you press a button.
 Replace the batteries and
re-register your remote if
necessary.
 Check the dials on your
Modules.
Why don’t I hear a beep
from my Security Console
when I register a Door/
Window Sensor or Motion
Detector.
The system may already be
registered. Disarm your Security
Console, and check to see if it
chimes when you press test on the
Door/Window Sensor, or the alarm
trips when you press test on a
Motion Detector (when the system is
armed).
 If it does, the sensor is already
registered and no further action
is necessary.
 If not, re-register the Sensor/
Motion detector (see Registering
Door/Window Sensors and
Registering Motion Detectors on
pages 9 and 11).
49-1000 UG.indd 27 7/27/2004 6:49:55 PM