Ricoh MP C7500 - Manual (Page 33)

33
2000 Sheet Finisher with Saddle Stitch
Staple (SR4020)
The 2000 sheet booklet maker option is a
staple finishing and saddle stitch finishing
option for the General Office market. The shift
tray will hold up to 2000 sheets stapled in up
to 5 positions including saddle stitch. The unit
will also staple Z folded documents produced
using the Z fold option. With this unit, the
customer can produce normal collated and
stapled document sets or professionally
finished colour booklets of up to 60 sides (15
sheets) in-house. There is a 2/4 hole punch
option for this finisher (Punch Unit Type 3260)
and a jogger option (Jogger Type 3260).
2 Source Cover Interposer (CI5000)
A 2 station cover sheet interposer can be
installed between the mainframe and finisher.
The interposer is used to feed pre-printed
material for inclusion as covers. The
interposer has a dual 200 sheet capacity and
will feed material of up to 216gsm.
This option allows users to insert pre-printed
or full colour sheets into live job streams for
collation and finishing. It provides cost
effective pre-printed integration with new print
output. Dual trays allows for different covers to
be placed on the front and back of each set.
Cover Interposer (CI3260)
There is also a single source cover interposer
option for Aficio MP C6000 and MP C75000.
The single tray version can feed up to 200
font/back covers of A5 to A3 size paper and
weights of up to 216g/m
2..
Key Selling Points
9-Bin Mail Box (CS391)
CS391 is 9-Bin Mailbox option which can be
attached to the 50 sheet Staple Finisher &
Saddle Stitch Staple Finisher. Ideal for the
general Office, it allows users to route finished
print jobs to a mail box for collection when
convenient. Each mail box tray will hold up to
100 sheets. Please not, CS391 can not attach
to the 100 sheet Staple Finisher (SR5000).
GBC Stream Punch
The GBC Stream Punch is a third party punch
system common to the Aficio MP
9000/1100/1350. It can be installed in
combination with the SR5000 Finisher. The
system will punch paper of weights of up to
216 g/m
2 at full engine speed. Each sheet is
punched individually. The punch unit is fully
integrated and can be operated directly from
the touch panel display or from the RPCS
printer driver. With several different punch dies
available, it can eliminate all manual off-line
punching saving operators considerable
manual effort and time.
Pre printed and colour sheets can be punched
in-line using the new dual tray Interposer. Die
sets are easily interchanged without special
tools or levers to produce professionally
finished manuals and guides with precise hole
alignment for sets with pages that are easy to
turn. The die sets available are:
- 2/3/4 hole
- 11 hole VeloBind
- 19 hole CombBind
- 21 hole WireBind
- 32 hole WireBind
- 44 hole ColorCoil
- 32 hole ProClick