Ricoh MP C7500 - Manual (Page 32)

32
A4/LT LCT (RT43)
An alternative to the A3/DLT LCT, the 4000
sheet A4/LT LCT provides the means to
dramatically increase the online capacity of A4
paper. With the A4 LCT fitted, the paper
capacity of the Aficio MP C6000 and MP
C7500 is increased to 7400 sheets. The
maximum paper weight that can be fed via the
aA4 LCT is 128 g/m
2 . This unit does not
connect via the bypass feed which means that
heavyweight media can still be fed through the
bypass unit.
A3 DLT Tray
An optional A3 tray replaces the 2 x 1000
sheet A4 tandem tray. This unit converts the
top tray to A3 format and increases the
machine’s A3 capability. This can be important
in environments where the bulk of output is A3
or where work will be produced two up and
trimmed to A4 after production.
Z Folding Unit (Z4000)
This unit is common to the MP9000/1100/1350
series and provides the means to fold A3/DLT
paper into A4/LT size documents and A4/LT
size paper into A5/HLT size documents for
use and filing. This option will find applications
in both the General Office market (in finance
departments for example where spreadsheets
and reports are produced) and in Light
Production (where there 4 page leaflets and
fliers are produced). This unit can be attached
to either the 100 Sheet Staple Finisher
(SR5000) or the 50 Sheet Staple Finisher
( SR4010).
100 Sheet Staple Finisher (SR5000)
The SR5000 brings production-level finishing
to high volume environments with 3,000 sheet
capacity for long periods of unattended
operation. The finisher has two delivery
positions; a 500 sheet proof tray delivers loose
material for easy collection, whilst the 3000
sheet shift tray delivers finished documents
sets.
The finisher has a fully integrated jogger which
installs on top of the Shift Tray and gently taps
collated sets into perfect alignment prior to
stapling for a flush edge. A new triple pre-
stack design improves stapling productivity to
100%. 100 sheet per set stapling capacity
allows thick documents to be professionally
finished. Multiple staple positions enable
proper binding of documents in all paper sizes/
orientations.
The system temporarily stops printing when
3,000 sheet shift tray capacity is reached and
restarts automatically when emptied. The shift
tray offset stacks document sets that are not
stapled for easier set separation.
Please note that an optional Finisher Adapter
is necessary when you connect the SR5000 to
the MP C6000 and MP C7500.
2 / 4 Hole Punch
An option for the SR5000 finisher, the hole
punch provides full-speed on-line punching of
documents in either 2 or 4 hole format. The
user selects which hole format is required
through the print driver or at the touch panel.
The system saves the user manually punching
documents after production or using more
expensive pre-punched paper.
50 Sheet Staple Finisher (SR4010)
There is also a 50 sheet staple finisher option
for Aficio MP C6000 and MP C75000. This
unit can staple up to 50 sheets of paper in four
positions. The shift tray will hold 3000 sheets
and the proof tray, another 250 sheets. This
finisher id likely to be the preferred option for
the General Office market. There is a 2/4 hole
punch option for this finisher (Punch Unit Type
3260) and a jogger option (Output Jogger Unit
Type 3260).
Key Selling Points