Raypak P-R185B To P-R405B - Manual (Page 15)

15
INSTALLING THE TOP COVER
OUTDOOR KIT ONLY
22. Remove the two pieces ofg metal tape holding the top
panel cover up and discard.
23. Insert the rear two tabs into the slots on the heater top
and slide the top panel cover backwards. See Fig.13.
24. Lower the top panel cover and using your thumbs,
push tabs in and insert the two front tabs into the
slots on the top of the heater. See Fig.14.
25. Lower the top panel cover flush to the top and release
the tabs. They will spring into place as shown in
Fig.15.
26. Turn the gas and electricity to the heater on.