3 connecting the pc4701 and emulation pod, 1) connecting the cable to the pc4701, Caution – Renesas Single-Chip Microcomputer M37900T2-RPD-E User Manual

Page 26

Text mode
Original mode

( 26 / 52 )

3.3 Connecting the PC4701 and Emulation Pod

To connect the emulation pod to the PC4701, use the FLX120-RPD 120-pin flexible cable included
with this product package. Connect the PC4701 side connector of the FLX120-RPD to the cable
connector of the PC4701, then secure with the screws.

(1) Connecting the Cable to the PC4701

Figure 3.9 shows how to connect the PC4701 and FLX120-RPD.

Figure 3.9 Connecting PC4701 and FLX120-RPD

CAUTION

Note on Connecting the Cable:

• Always shut OFF power before connecting the cable. The power ON state could

destroy internal circuits.

Note on Securing the Screws:

• After connecting the cable to the emulator main unit, be sure to secure the screws.