Ricoh 70 User Manual

Page 98

5-10

Troubleshooting

0 1

Invalid Password

A valid password is required to access
this area of the OCP.

Retry password. If incorrect, contact
your System Administrator.

Invalid Time Server Address

Incorrect value in time server IP
address field.

Check the time server IP address via
the Web Utilities.

Invalid Value

Incorrect value entered.

Re-enter value.

LED Eraser Not Set
Set Erase Lamp

E080

The LED eraser is not set.

Contact your authorized Service
Technician.

Lifting Tray Name

The specified tray is moving into the
feed position.

Status message. Wait for the printer to
return to a Ready state.

Loading Fail Network

Status message.

Wait for the printer to return to a Ready
state.

Loading Network

Status message.

Wait for the printer to return to a Ready
state.

Low on Front Staples

Status message.

Have replacement staples available.

Low on Rear Staples

Status message.

Have replacement staples available.

Low Toner - Recovery

E09A

In process of supplying the toner.

Wait for the printer to return to a Ready
state.

MBT
Load xx

E090

The wrong paper size is loaded in the
multi-bypass tray.

Load the MBT with the requested
paper size.

Network Load Failed

Network connection error.

Check the Ethernet cable of the NIC.

Open Stacker Full

The output tray is full.

Remove the paper from the tray.

Out of Front Staples
Load Staples

The front stapler unit of the Finisher is
out of staples.

Replace the front staple cartridge.

Out of Rear Staples
Load Staples

The rear stapler unit of the Finisher is
out of staples.

Replace the rear staple cartridge.

Paper in Duplex Path
Remove Paper

E05C

Paper jam on return path 1.

Remove the jammed paper.

Paper in Fin Holding Path
Remove Paper

Paper jam in holding path.

Remove the jammed paper.

Paper in Fin Sheet Path
Remove Paper

Paper jam in sheet path.

Remove the jammed paper.