Ricoh 70 - Manual (Page 84)

4-28 Care and Maintenance
OG L 0 1
Cleaning the Toner Bottle Joint
1. Open the Toner Supply Cover.
2. Clean inside the Toner Supply Cover by wiping any visible toner away with a dry,
lint-free cloth.
3. Close the Toner Supply Cover.
Cleaning the Conveyance Belt Area
1. Open the Front Cover.
2. Turn the TH Handle to the RELEASE position.
3. Remove the Drum Unit. Refer to page 4-12 for instructions.
4. Clean the Paper Guide, TR Guide, and the Lower Stay (C) by wiping any visible
dust away with a dry lint-free cloth.
5. Replace the Drum Unit.
6. Turn the TH Handle to the LOCK position.
7. Close the Front Cover.
NOTE :
When cleaning in the area surrounding the Drum Wrap Sensor, do not
touch the Drum Wrap Sensor or the hook of the Drum Wrap Sensor
Holder.
Toner Supply Cover
Toner Hopper Unit
TR Guide
TH Handle
Lower Stay (C)
Paper Guide
Drum Wrap Sensor