Ricoh 70 - Manual (Page 151)

Booklet Finisher Adjustments (DDP92 only) D-1
OG L 0 1
Appendix D
Booklet Finisher Adjustments (DDP92 only)
Adjust the stapling and folding position if the Booklet Finisher is installed.
This section is used for DDP92 only.
Test Print
1. Power on the Printer.
2. Set the paper in the desired Hopper.
3. Execute Test Print.
a. Select Printer Menu on the Main Menu screen.
b. Select Test Print.
c. Select Finishing Test.
d. Select Saddle Stitch.
e. Select the Paper Source in which you’ve set the
paper.
4. The printer starts printing and a booklet is delivered
to the booklet tray.
5. Check the folding position of the booklet.
If the folding position is incorrect, begin the
adjustment procedure on
page D-2 .
If the folding position is correct, begin the
Staple Adjust procedure on
page D-5 .
FOLD/STAPLE ACCURACY
Between staple line and fold line 1.3mm (max)
Between staple line and center line +/- 1.3mm (max)
Between fold line and center line +/- 1.3mm (max)