beautypg.com

Ricoh 70 User Manual

Page 64

background image

4-8

Care and Maintenance

OG

L

0 1

4.

Lock the empty developer bottle by turning the developer bottle cap about 160
degrees in the direction shown below.

5.

To start the exhaust process, make the following selections from the OCP:

Setup / Consumable / Developer Mix / Exhaust

The exhaust process takes approximately 2 minutes.

6.

Remove the developer bottle by turning the bottle cap back about 160 degrees in
the direction shown below.

CAUTION

!

Hold the developer bottle when you turn the cap so that the bottle is not
turned together with the cap.

160°