Ricoh CAPLIO R4 - Manual (Page 34)

32
The focal distance is measured at a
maximum of five points. Green frames
appear to indicate the positions that are in
focus.
Note
To specify a focus position during macro shooting, use the AF target shift function. (P.87)
5.
Gently press the shutter release
button all the way.
The still image you have taken freezes
for a moment on the LCD monitor and is
recorded.
Note
• Press the shutter release button gently to prevent camera shake.
• The
mark indicates that camera shake may occur. Hold the camera still and focus
the camera again. Turning the camera shake correction function on by pressing the E
(Camera Shake Correction) button minimizes blurring due to camera shake. (P.29)
• The flash fires twice to increase the AE/AF (Auto Exposure/Auto Focus) accuracy.
• When [LCD CONFIRM.] is set to [OFF] in the SETUP screen, the still image shot will not be
displayed on the LCD monitor.
Reference
• For information on how to change the image confirmation time, see P.119.
• For information on how to change the focusing mode, see P.64.