Ricoh CAPLIO R4 - Manual (Page 26)

24
Setting the Date and Time
When the power is turned on for the first time, the date/
time setting screen appears.
1.
Press the !"#$ buttons to set
the year, month, date and time.
Change the value with !" and move
the frame with #$.
2.
In [FORMAT], choose the date and
time format.
Select the date and time format with
!".
3.
Check the display and then press
the C/D button.
The date is set.
Pressing the DISP. button on this screen
allows you to cancel the setting.
Note
• If the battery is removed for more than one week, the date and time settings will be lost.
These settings must be made again.
• To retain the date and time settings, load a fully charged battery for more than two hours.
Reference
• For information on how to set the date and time, see P.122.
• For information on how to put a date stamp on each frame, see P.79.
Setting at shipping