RCA 29993 - Manual (Page 6)

6
I
NSTALLATION
1. Connect the telephone line cord to the LINE
jack on the back of the unit and then into a
modular wall jack.
2. Connect the telephone line cord from your
telephone into the jack on the back of the
answerer marked PHONE. (You don’t have to
connect your telephone in order for the
answerer to record incoming messages.)
3. Connect the power supply into the POWER
9V AC jack on the back of the answerer. Plug
the other end into an AC power outlet. The
unit announces, “Answer on, greeting one” and
indicates the status on the display. The time
is also shown on the display as
12:00.
NOTE: After power is supplied to the unit, it performs a self-test. If the self-test fails, the unit displays FLASH
ERROR. If this occurs, the unit needs to be serviced.
CAUTION: Only use the Thomson 5-4077 power supply that was packed with this unit. Using other power
supplies may damage the unit
1
2
3