Operating your receiver, Your remote control – RCA RTDVD1 User Manual

Page 15

Operating Your Receiver

Your Remote Control

Please be sure you have inserted the batteries into the remote
control (see relevant section on page 3.) You can test it by

pressing any button. If it works, the red LED will light.

1. ON/OFF
To turn on or off the receiver and other auxiliary components (see page 14
“Using the Remote to Control Additional Components”).

2. Source Buttons
To turn on and select various audio/ video sources.

3. CH+, CH- (Channel Buttons)
To select programmed stations in TUNER mode.
To skip to the next or previous chapter or track in DVD, CD & MP3 mode.

4. VOL (Volume Buttons)
To adjust the volume.

5. MUTE
To mute all audio outputs.

6. SHIFT
To access second function features. (Function features controlled by the
SHIFT key are colour coded to have the same colour as the word “SHIFT”.

7. Adjustment Buttons
Press SHIFT then OK/FUNCTION, the display will toggle among:
NOTE: Do not press the SHIFT key when in Tuner mode.
• Preset EQ (Stereo only),
• SLEEP Mode
• DIM Mode
• NIGHT Mode (Dolby Digital Only).
When the display shows the setup you want to change, press the left and
right arrow buttons beside OK button to make changes, then press OK to
finalize your choice.

8. Number Buttons
• In Tuner mode, to select a preset station.
• In DVD/CD mode, to select a track to be played (Audio CD only).
• For separate RCA 5 disc CD Player, to select track or DISC. (Must use the
SHIFT button to select Disc)

9. MENU
• In Tuner mode:

- Press AM/FM
- Press to store desired frequency in memory. The flashing word MEMORY

in red will appear in display. Input your desired channel number while the
word is still flashing and the frequency will be stored. (For details, refer to
"Storing Radio Stations” under “Manual Preset” on page 38)
• In DVD mode, press for menu setup for DVD title.

10. Operation Buttons
• TUNER, press AM/FM on the remote to enter tuner mode.
Press REVERSE and FORWARD keys to tune down or up the radio frequency.
• DVD/CD, press DVD to enable PLAY, RECORD, STOP and PAUSE keys. The
remote control currently operates most Thomson, RCA and GE products,
but it can be programmed to operate devices from other manufacturers
(For details, refer to “Using the Remote to Control Additional Components”
on page 14.

11. AUDIO/SUBTITLE
• Press AUDIO/SUBTITLE To select between left, right and stereo channel
when playing VCD.
• Press SHIFT then AUDIO/SUBTITLE to turn on or off the subtitle function
or press and hold AUDIO/SUBTITLE to access the subtitle menu for DVD
mode.

12. DIGITAL/LANG
• Select the way your SAT external audio/video devices are connected to the
receiver (Analog, Optical or Coaxial) through the SAT audio input.
• Press SHIFT then DIGITAL/LANG to access the title language selection
menu.

13. LEVEL/ANGLE
• Press to adjust the volume of individual speaker. Press repeatedly and the
display will toggle among different channels (Left front speaker, Right front
speaker, Center speaker, Left rear speaker, Right rear speaker, and
Subwoofer). Press the left and right arrow buttons beside OK button for
adjustment.
• Press SHIFT then LEVEL/ANGLE to select different screen display angles.

14. SURR (Surround Sound Control)/FRAME
• Press to change the surround sound settings. The display will toggle
among any stereo modes (DOLBY DIGITAL, DOLBY PL II MOVIE, DOLBY PL II
MUSIC, DOLBY PRO LOGIC, DOLBY 3 STEREO, ARENA, JAZZ, THEATER, STA-
DIUM, DISCO, STEREO)
• Press SHIFT then SURR/FRAME to activate STILL step backward.
(For details, refer to section “Advanced Sound Control” on page 15.)

After using AUDIO, DIGITAL, LEVEL or SURR keys on the
remote control in DVD/CD function mode, you must press
the DVD/CD or SHIFT key to use other DVD keys.

STOP

P AUSE

ON OFF

VCR

VCR 2

DVD

LEVEL

AUDIO

RECORD

SURR

DIGIT AL

PLAY

FORWARD

REVERSE

MUTE

/ C H +

C H -

APE

CLEAR

SA T•CABLE

u n i v e r s a l

AM•FM

INFO

O B A C

•

•R

FUNCTION

SHIFT

REPEAT

RANDOM

PROGRAM

INPUT SEEK

ANT-FMS

SUBTITLE LANG

ANGLE

FRAME

NOTE

The remote button NPUT•SEEK does not work.