RCA VR643HF - Manual (Page 62)

60
appendix a: reference
Back Panel
3CH4 Switch Selects the channel to which you will tune the
TV to see the VCR picture if you connect the VCR using one of
the basic hookups.
AUDIO (R and L) and VIDEO IN Jacks Receives signals from
another component, like a VCR or camcorder, when it is
connected to these jacks. Use INPUT on the remote to select
LINE to record from these jacks.
AUDIO (R and L) and VIDEO OUT Jacks Sends signals from
VCR to another component, like a TV or VCR, when it is
connected to these jacks.
IN FROM ANT Jack Receives a signal from an antenna or
cable system when attached.
OUT TO TV Jack Passes signal to TV using the cable supplied.
VCR
CH
AUDIO
R
L
VIDEO
OUT IN IN FROM
ANT
OUT TO
TV
4 3