Ricoh GR Digital II - Manual (Page 42)

40
If
yo
u
are u
s
in
g
th
e
ca
mera
fo
r th
e
fi
rst ti
me
, r
e
ad
th
is
secti
o
n
.
Note ---------------------------------------------------------------------------------------------------
• Press the shutter release button gently to prevent camera shake.
• The J symbol indicates that camera shake may occur. Hold the camera still and
focus the camera again.
• The flash fires a pre-flash to increase the AE accuracy.
• You can set the time the still image you have taken appears on the picture display.
You can also make settings to have the image remain displayed until the shutter
release button is half-pressed or not to display the image after shooting. (GP.176)
• The aperture value is controlled up to F11 in auto shooting mode. (When the aperture
value is between F7.1 and F11 in auto shooting mode, the aperture and internal ND
filter are used together.)