Ricoh GR Digital II - Manual (Page 111)

109
V
a
rio
u
s
S
hoo
ting
Fu
nc
tion
s
1
You can adjust the light intensity of the flash. You can set the light
intensity from -2.0 EV to +2.0 EV in increments of 1/3 EV.
1
Turn the mode dial to 5/P/A/M/SCENE.
2
Press the MENU/OK button.
• The shooting menu is displayed.
3
Press the " button to select
[Flash Expo. Comp.] and press
the $ button.
• The flash exposure compensation bar
appears.
4
Press the !" buttons to make
the setting.
5
Press the MENU/OK button.
• The setting appears on the screen
except when the flash is set to [Flash
Off].
Note ----------------------------------------------------------------------------------------------
For information on how to use the flash, see P.44.
Caution------------------------------------------------------------------------------------------
Flash exposure compensation may not work outside the flash range (GP.44).
Adjusting the Light Intensity of the
Flash (Flash Expo. Comp.)
0 . 0
Ok