Ricoh GR Digital II - Manual (Page 184)

182
C
h
a
n
gi
ng C
a
m
e
ra
Se
tti
n
g
s
5
When shooting with [Pic Quality/Size] set to RAW mode (GP.91),
a JPEG file associated with the RAW format file (.DNG file) is
recorded at the same time. You can change the picture quality and
image size of this JPEG file.
To change the picture quality and image size settings of the JPEG
file, follow the steps below.
1
Display the setup menu.
• For the operating procedure, see P.156.
2
Press the " button to select [RAW/JPEG Setting] and
press the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button, or
press the # button and then
the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
When [RAW/JPEG Setting] is set to [N640] with [Pic Quality/Size] set to [RAW3:2], black
borders are added to the top and bottom of the JPEG image. When set to [RAW1:1],
black borders are added to the left and right of the JPEG image.
Changing the RAW Mode JPEG Image
Setting (RAW/JPEG Setting)
Available Settings Description
Fine
*Default setting Picture quality: Fine mode; Image size: Recorded at the same
size as the RAW format file.
Normal Picture quality: Normal mode; Image size: Recorded at the
same size as the RAW format file.
N640 Recorded at the same picture quality and image size as [N640]
(GP.91) in [Pic Quality/Size].