2 changing the osd language, 3 setting the pc display properties, Changing the osd language – Runco PL-61DHD User Manual
Page 40: Setting the pc display properties, Iminar, Pre l iminar y
30
Runco PlasmaWall Owner’s Operating Manual
PRE
L
IMINAR
Y
4.2
Changing the OSD
Language
The PlasmaWall OSD language is initially set to English, but can also display the menus in
French (Français), Spanish (Español) or German (Deutsch). To change the OSD language:
1. Press MENU and enter the Service menu passcode.
2. Press MENU again and select Service from the Main Menu.
3. Select Language from the Service Menu.
4. Press
or
to highlight the desired language and press ENTER. The change takes
effect immediately.
4.3
Setting the PC Display
Properties
To maximize image quality when using the PlasmaWall with a personal computer, you
may need to adjust the display properties of your PC video card. To do this:
1. Choose Settings from the Windows Start
menu and click on “Control Panel.”
2. Double click on the Display icon.
3. Click the Settings tab on the display dialog
box.
4. Adjust the resolution to 1024x768 pixels.
You must enter a passcode to access the Service menu.
Note