Renesas MCU Board for PC4504 Emulator System M34570T-MCU - Manual (Page 16)

( 14 / 34 )
4.2 Specifications
Table 4.1 lists specifications of M34570T-MCU.
Table 4.1 M34570T-MCU Specifications
*1 M34570T-MCU has an oscillator circuit board OSC-2 (for 4.19MHz) that is incorporated when
shipped from the factory. In addition, it comes with an oscillator circuit board OSC-2, with only
a connector J1 mounted.
*2 M34570T-MCU operates at the medium-speed mode (instruction-clock f (X
IN
)/12) immediately
after a RESET is released.
M34570MX-XXXFP, M34570EXFP
M34570E8FP (mounted)
233 (L) x 135 (W) x 26 (H) mm
5 to 35 ° C (non-condensing)
M34570T-MCU
80-wire half-pitch cable
40-wire normal-pitch cable
External trigger cable
PCA4029
OSC-2 (for changing frequencies)
Applicable MCUs
Evaluation MCU
3V
5V
Medium-speed mode: 4.19MHz
High-speed mode: 1.0MHz
Medium-speed mode: 4.19MHz
High-speed mode: 2.0MHz
3V or 5V
Supplied by the PC4504's internal power supply (+5V, +12V)
Port
D
0
to D
5
P0
0
to P0
3
P1
0
to P1
3
P2
0
to P2
1
Direction
output
Input/output
Input
Device used Output type
N-channel
open drain
-
Power supply
Port emulation
Board dimensions
Operating temperature
Product configuration
Maximum operating
clock frequency
Target system voltage
Input: 74HC541
Output: 74LS06
Input: 74HC08