Pre l iminar y – Runco VX VIDEO XTREME VX-33D User Manual
Page 39
Runco VX-33d Installation/Operation Manual
23
PRE
L
IMINAR
Y
3.
Remove the Lens Cavity Front Cover.
4.
Remove the Rear Lens Cap.
5.
Hold the lens assembly with the motor
facing the upper-right corner of the
Lens Cavity. Carefully insert the back
of the lens assembly into the hole in the
lens flange.
DO NOT PUSH THE LENS ASSEMBLY
ALL THE WAY IN. Only push the lens
assembly in far enough so that the front
of the lens motor is clearly behind the
projector chassis cover.
6.
Carefully rotate the lens assembly 45
degrees clockwise until the motor
socket connector is aligned with the
connector on the flange. Then, gently
push the lens assembly in until it is
seated flush against the flange and the
connectors have seated.
See also other documents in the category Runco Projectors:
- CL-510 (36 pages)
- Video Xtreme VX-44d (114 pages)
- VX-4c 720P (2 pages)
- VX-55D (120 pages)
- VX-5C (2 pages)
- VX-80d (108 pages)
- SC-1 (122 pages)
- Reflection (72 pages)
- REFLECTION CL-510LT (36 pages)
- VX-2c (36 pages)
- VX-50d (108 pages)
- CL-700 (2 pages)
- SC3300W (2 pages)
- DIGITAL LIGHT PROCESSING VX-2000D (90 pages)
- VX-1000d (76 pages)
- VX-5000ci (43 pages)
- DTV-873 (2 pages)
- VX-6c (110 pages)
- VIDEO XTREME VX-22D (90 pages)
- VX-2i (60 pages)
- 61SBX59B (72 pages)
- VIDEO XTREME VX-60 960p (2 pages)
- Vision 85 (88 pages)
- CL-610LT (56 pages)
- Video Xtreme VX-2000d (90 pages)
- DLC-2000HD (2 pages)
- VX-33I (92 pages)
- CL-610 (76 pages)
- Video Xtreme VX-2ix (80 pages)
- CINEWIDE VX-6000D (112 pages)
- VX-5000d (6 pages)
- VX-3C (2 pages)
- 1080p (114 pages)
- VIDEO XTREME VX-22I (88 pages)
- VIDEO XTREME VX-33I (92 pages)
- VX-4c (110 pages)
- VX-2000d (88 pages)
- DR-300c (2 pages)
- CL-810 CL-810 Ultra Cl-810 CineWide CL-810 / SDC-1 (76 pages)
- DTV-992 (69 pages)
- CL-810 (58 pages)
- Reflection MBX-1 (2 pages)
- Video Xtreme VX-6000d (102 pages)
- DR-300 (2 pages)