Temperature controls - operating, Using high temperature display controllers – Rinnai 26i User Manual

Page 25

Using High Temperature Display Controllers.

You will need to program the Master controller if you want to display and use
temperatures over 50

C. Programming only needs to be done on Master universal

controllers; other universal controllers will not allow this, and Deluxe Kitchen Controllers
are supplied already programmed to allow high temperatures. Temperatures in
bathrooms should never exceed 50

STEP 1: On the Master controller press and hold the Transfer and On/Off buttons

simultaneously (see fig 2.) until a “beep” is heard (approx. 5 seconds)

STEP 2: When the Master controller is switched on it should be possible to select

temperatures higher than 50ºC. If not repeat STEP 1.

Note:

If the master controller is replaced, repeat STEP 1 above for the new controller.

TEMPERATURE CONTROLS - OPERATING

This manual is related to the following products:

HD50i