Rinnai 26i - Manual (Page 12)

12
TECHNICAL DETAILS
* Factory Setting
** Minimum operation flow based on temperature setpoint and inlet
conditions.
Infinity Model Infinity 26i HD50i Units
Installation Internal Internal
Nat Gas Press Low 1.9 1.9 mbar
Nat Gas Press High 8.5 8.5 mbar
LPG Press Low 2.3 2.3 mbar
LPG Press High 10.8 10.8 mbar
Height 600 600 mm
Width 350 350 mm
Depth 224 224 mm
Weight 22 22 kg
Flue System Direct Forced Vent
Temp. Range Controllers 37C - 55C 37C - 65C deg C
Ignition
Gas Consumption Low
Nat Gas 4.4 4.4 kW
LPG 4.4 4.4 kW
Gas Consumption High
Nat Gas 54 54 kW
LPG 54 54 kW
Max Flow raised 33C 19.6 19.6 L/min
Min Operation Flow 2.4** L/min
Water Pressure Nom. 1.4 - 8.3 bar
Power Supply 230 V / 50 Hz
Electric Consumption 80 80 Watts
Direct Electronic Ignition
Temp. Range without
Controllers 40,43,50,55*,
60,65,75
40,43,50,55,
60,65*,75,85
deg C