beautypg.com

Rinnai uk warranty (from jan 2005) – Rinnai 26i User Manual

Page 2

background image

2

RINNAI UK WARRANTY (from Jan 2005)

As the purchaser of this high quality Rinnai Water Heater you are provided with the following
conditional guarantee.














Definition of Standard Use.


The warranty period allocated under Standard Use is based on Domestic and Light Commercial hot
water usage. Rinnai Standard Use warranty periods apply only where Rinnai water heaters are
installed in domestic and light commercial situations at operating temperatures below 65

0

C and do not

include installations incorporating storage cylinders or building flow and return systems.

The warranty shall apply to any Rinnai water heater from the Infinity or HD range used in this way.

Definition of Commercial Use.


The warranty period allocated under Commercial Use are for Rinnai HD water heaters installed at
premises such as commercial and industrial buildings, cafes, caravan parks, and sporting complexes.
Commercial Use warranty applies to:

Water heaters supplying a central shower block
Water heaters supplying kitchens used for the bulk preparation of food.
Water heaters set to 65

0

C or higher.

Water heaters used in commercial or industrial processes.
Any application that uses Rinnai water heaters in conjunction with storage tanks
Any application that uses Rinnai water heaters in conjunction with a flow / return system.
Water heaters installed as components of centralised bulk hot water systems.

Situations defined as Commercial Use MUST have the Rinnai HD range of water heaters to be
eligible for the Commercial Use warranty. Rinnai Infinity units used in Commercial Situations are only
subject to a 1 year warranty across the board.

No Rinnai warranty will cover faults arising from improper installation or gas supply, water
contaminants beyond defined limits, environmental factors, plumbing fittings, or other outside
influences of which Rinnai is not responsible. Service calls for these issues will be chargeable.

Heat Exchanger

All Other Parts

Parts Labour Parts Labour

Standard Use

3 Years

1 Year

3 Years

1 Year

(26i)

Commercial Use

5 Years

1 Year

5 Years

1 Year

(HD

50i

Description pH

Total Dissolved

Solids (TDS)

Total Hardness

Chlorides

Magnesium

Calcium

Sodium

Iron

Maximum Recommended

Levels

6.5 - 9.0

600 mg/litre

200 mg/litre

300 mg/litre

10 mg/litre

20 mg/litre

150 mg/litre

1 mg/litre

This manual is related to the following products: