Temperature controls - operating, Using 4 universal temperature controllers – Rinnai 26i User Manual

Page 24

Text mode
Original mode

Using 4 Universal Temperature Controllers.

You will need to activate the fourth controller.

STEP 1:

STEP 2:

Note:

If the master controller is replaced, repeat STEP 1 above for the new controller.

TEMPERATURE CONTROLS - OPERATING

On the Master controller press and hold the Transfer and On/Off buttons
simultaneously (see fig 2.) until a “beep” is heard (approx. 5 seconds)

Check that the display on all Four controllers is lit
and displaying a temperature when switched on. If
any ONE of the controllers displays two dashes (see
fig 1.) in the display repeat STEP 1.

This manual is related to the following products:

HD50i