RCA HDV5000 User Manual
Page 18
1
chapter 1
Connections and Setup
The Jacks on the Back of the HD DVD Player
When connecting, make sure you connect Output jacks to Input jacks, Video to Video, Right Audio to Right Audio, etc.
1
2
3
4
5
6
7
8
9
1. CONTROL jack
Used for custom control devices
2. LAN port
Use this to connect to a network with an always-on broadband
connection
3. AC IN
Connect the power cord here.
4. VIDEO OUTPUT (VIDEO, S-VIDEO) jacks
Outputs video and audio signals to a connected TV or ampli-
fier.
5. COMPONENT OUTPUT jacks
Outputs video signals to a connected TV or monitor.
6. HDMI OUTPUT jack
Outputs video/audio signals to a connected TV, monitor or AV
amplifier. Connect to a TV, monitor or AV amplifier equipped
with HDMI input.
7. DIGITAL AUDIO OUTPUT BITSTREAM/PCM (OPTI-
CAL/COAXIAL) jacks
Outputs digital audio signals. Connect to a digital audio input
on an amplifier equipped with digital audio decoder. When con-
necting the optional digital cable, fit the connector into the jack
firmly.
8. ANALOG AUDIO OUTPUT 5.1 CH SURROUND
jacks
Connect to an amplifier equipped with 5.1 CH audio input.
9. ANALOG AUDIO OUTPUT 2 CH jacks
Outputs audio signals to a connected TV or AV amplifier.
s&c1.indd 14
3/15/06 9:31:15 AM