RCA HDV5000 - Manual (Page 14)

10 chapter 1
Connections and Setup
TV
Video cable
(not supplied)
Connect to audio input
jacks on your TV using
the audio cable.
Component video input
1. Connect the audio cables to the ANALOG AUDIO OUTPUT 2CH L (left – white) and R (right – red) jacks on the back of your
HD DVD Player, and to the corresponding Audio Input jacks on your TV.
2. Connect the color-coded Y, Pb, Pr cables from the output jacks on the back of your HD DVD player to the Y, Pb, Pr video in jacks on
your TV.
3. Turn on the unit and your TV.
4. When you turn the unit on for the first time, a setting menu appears. Use the arrow buttons and the OK button to select the Gen-
eral option, and then the Clock Set option (for details, see page 32). Set the proper time and date. When you are finished, press the
SETUP button to exit the menu system.
5. Press the V. OUTPUT button until the HDMI indicator on the display is OFF.
6. Press the RESOLUTION button on the remote until the resolution output (480i, 480p, 720p or 1080i) matches the resolution of the
TV or display.
Connecting to a TV with Component (Y, Pb, Pr) Jacks
s&c1.indd 10 3/15/06 10:17:21 AM