Roland V-GUITAR VGA-7 User Manual
Page 37
37
Panel Descriptions
35 MIDI
MIDI IN Connector
By connecting a separately available MIDI foot controller
(e.g., Roland FC-200) you can use your feet to switch patches.
This connector is also used to receive data from an external
MIDI device.
MIDI OUT Connector
This connector is used to transmit VGA-7 data to an external
MIDI device.
* Depending on the system settings, this connector can also be
used as a MIDI THRU connector which re-transmits the data
received at MIDI IN without change. (p. 42)