Saving your modifications in a patch (write), Manual mode – Roland V-GUITAR VGA-7 User Manual

Page 24

About Patch

Saving your modifications in
a patch (Write)

If you wish to save the modifications you have made, you
must store them in a user patch. This operation is called
“Write.”

All settings except for the MASTER knob can be saved.

setting will also be remembered.

1. When you finish modifying (editing) the settings, press

[WRITE], getting its indicator to blink.

fig.46

2. Use [BANK ▼/▲] and [NUNBER ▼/▲] to select the

user patch in which your settings will be stored.

* Patch numbers can also be selected using the direct number

buttons.

3. To write the settings, press [WRITE].

While Write is being executed, the indicator flashes
rapidly.

When the data has been written, the indicator will go
out, and the writing destination user patch will be
displayed.

If You Want to Cancel a Write Operation
in Progress

Press either [TUNER], [VARIATION/EDIT], [GK],
[SYSTEM], or [PRESET/USER].

The values are left as is, and the Write operation is
cancelled.

Manual Mode

If you wish to play the sound specified by the current
settings of the knobs (rather than the sound memorized in
the patch), switch to Manual mode.

◆

To select Manual mode, press [MANUAL], lighting its

indicator.

In Manual mode, the display will show the following.

fig.19

After this, when one of the buttons or knobs is used, the
settings for that control appear in the display.

are showing in the display, you can change the settings value
directly by pressing the [SELECT/VALUE ▼/▲].

Press [A/B] to exit Manual mode and return to the
settings of the selected patch.

* The [MANUAL] indicator will also go out, and Manual mode

will be exited if you press one of the [PRESET/USER],
[BANK ▼/▲], [NUMBER ▼/▲] or Direct Number buttons.

◆

If you once again enter Manual mode, the previous

settings used in Manual mode are called up (except for

knob settings).

◆

If you hold down the Direct Number button that is lit

and press [MANUAL] to select Manual mode, settings

from the previous patch settings (other than the knob

settings) will remain active.

1,3